Here is a list of our most frequently asked questions. If you need more information before purchasing or can’t find an answer to your question feel free to contact us by visiting our contact page.
General FAQ
Does Locust Lake Village require HOA approval for insulation work?
Check the current Locust Lake Village Property Owners Association rules for contractor entry and work approval. Its official forms page directs owners to TownSq for building permits and other community documents. Whether a separate Tobyhanna Township permit or inspection is required depends on the scope of insulation or roof work.
How does contractor access work for insulation jobs in Arrowhead Lake?
Arrowhead Lake Community Association has gated access and a member system used for contractor and guest registration. The owner should confirm current contractor hours, gate procedures and any renovation approvals before the job. Association approval is separate from Tobyhanna Township building-permit requirements. Let us know about truck and trailer parking restrictions in advance.
What insulation improvements help a Mount Pocono vacation home in winter?
Attic insulation and accessible air sealing often deserve attention, especially if a house cools quickly between visits. Cold floors or a poorly insulated roofline may also affect comfort. We assess the existing insulation, ventilation, moisture and thermal boundary before proposing a material or R-value.
Can insulation and rim-joist air sealing help cold floors in Mount Pocono?
Often, but first we determine whether the floor is above an unfinished basement, vented crawl space, garage or another unconditioned area. Air leaks, missing insulation and moisture can all contribute. Spray foam may be suitable at selected rim joists; the correct floor or foundation insulation depends on the assembly and water conditions.
Is Mount Pocono Borough the same permit jurisdiction as Pocono Township?
No. Mount Pocono Borough is a separate municipal government from Pocono Township and Coolbaugh Township. A Mount Pocono mailing address does not establish the property’s actual jurisdiction. Check the parcel location, then ask the applicable code official whether an insulation repair, addition or regulated roof alteration requires permits or inspection.
Must 30-year-old attic fiberglass be removed before adding R-49 loose-fill insulation?
Not solely because of its age. Existing insulation that is dry and in good condition may sometimes remain, once accessible air leaks and ventilation details are addressed. In an attic with damaged or contaminated material, removal and cleanup may be appropriate before air sealing, repairing wall insulation and installing loose-fill fiberglass to the specified R-value.
Can closed-cell spray foam correct condensation problems in a Lords Valley cathedral ceiling?
It may be part of a properly designed unvented roof assembly, but only after the source of moisture is understood and roof leaks or wet materials are addressed. We have worked on a Hemlock Farms cathedral roof that was converted from a problematic vented assembly to an unvented closed-cell foam approach. The appropriate design depends on the roof’s construction and applicable code.
Does Hemlock Farms require approval before an insulation contractor comes to my house?
Hemlock Farms owners should check their current community rules for contractor access, work hours and any architectural or construction approval. Work in Blooming Grove Township may also require township permits or inspections depending on the scope. Community requirements and building-code approvals are separate.
Is closed-cell spray foam suitable for a Greentown cabin’s cathedral ceiling?
Sometimes. A cathedral roof assembly must be designed for condensation control, the applicable code, roof ventilation strategy and required protective barriers. A roof leak or wet sheathing must be addressed before spray foam is installed. We evaluate the assembly instead of recommending foam simply because the room has a sloped ceiling.
How can I improve cold floors in a Greentown cabin near Promised Land?
Cold floors may result from outside air passing beneath the house, gaps at rim joists, missing insulation or damp crawl-space conditions. The best scope depends on whether the crawl space is vented, whether the home is occupied year-round and whether water is entering. Air sealing, an appropriate insulation boundary and moisture control should be planned together.
Does a Greentown, PA insulation project fall under Greene or Palmyra Township?
Greentown addresses can be in Greene Township or Palmyra Township in Pike County. Confirm the property’s parcel jurisdiction before asking about permits. Greene Township’s lack of a zoning ordinance does not eliminate building-code requirements, and a permitted addition or roof alteration may be treated differently from a simple insulation repair.
What’s the right insulation approach for cold floors over a Sterling-area crawl space?
That depends on crawl-space ventilation, ground moisture, foundation design and the condition of the floor framing. Options may include insulating and sealing foundation walls with ground-vapor control, or insulating the floor assembly where appropriate. Active water entry and drainage problems must be corrected separately.
Does older attic fiberglass in Newfoundland always need to be removed?
No. Existing fiberglass may remain if it is dry, relatively clean and suitable to supplement. We evaluate air leakage, rodent damage, moisture and obstructions before deciding whether selective cleanup, air sealing and added fiberglass are enough or a complete removal is warranted.
Are Newfoundland, South Sterling and Sterling all in the same township?
No. Newfoundland and South Sterling are in Dreher Township in Wayne County, while Sterling Township is a separate municipality. Do not rely only on the mailing address when requesting an insulation or construction permit. Confirm the actual parcel municipality and any applicable development rules first.
Can I add loose-fill fiberglass over the existing insulation in my Moscow attic?
Often, yes, if the existing material is dry, reasonably clean and properly positioned. We first assess accessible air leaks, attic ventilation, damage and existing insulation depth. Wet or contaminated material, or insulation that prevents necessary repairs, may need to be removed before re-insulating.
